Victory Reach-In Servisní příručka stáhnout pdf (Strana 85)

Section 8 Component Replacement Procedures

8-5

Drain Tube Heater

1. Disconnect electrical power to the reach-in.

2. Loosen the mounting screws on the drain cover at the rear of the cabinet. Remove the cover.

3. Unplug the drain line heater.

4. Remove the clamp securing the clear plastic tube to the drain tube.

5. Remove the two mounting screws that fasten the drain tube to the inner liner wall.

6. Pull the drain tube down and forward, pulling the extension out of the rear cabinet wall.

NOTE: Do not try to repair or replace the drain heater. Replace the entire assembly only.

Figure 8-5: Drain Tube Heater

2. LOOSEN SCREWS AND

REMOVE DRAIN TUBE COVER

SV1250

3. DISCONNECT

HEATER

CONNECTIONS

4. DISCONNECT

HOSE

CLAMP

BACK PANEL

DRAIN SLEEVE

EVAPORATOR DRAIN PAN

DRAIN TUBE ASSEMBLY

6. PULL DOWN

5. REMOVE TWO SCREWS

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 91 92

Žádné komentáře

Victory Reach-In Servisní příručka Strana 85